 |
        |
 | |
 | |
 | |
 | |
Manuals and On-line Help | ||
| Temprecord For Windows and Palm PC User's Manual (2002) | This is PDF manual for an earlier version of the software that supported operation with Palm PCs. Users of the current version of Temprecord software should refer to the on-line help for Temprecord software or download the PDF. | |
| Temprecord User's Manual (2010) - HTML | The User's Manual for the current release of Temprecord software as a browser-based on-line help system. | |
| Temprecord User's Manual (2010) - PDF | The User's Manual for the current release of Temprecord software as a downloadable PDF file. | |
Tutorials | ||
| Exporting Temprecord data to a spreadsheet. | ||
| What do the flashing read and green LED's signify? | ||
| Limitations of version 2.10 firmware Temprecord loggers. | ||
| How to carry out an ice-point check. | ||
| Solving reader interface problems. | ||
| IP ratings explained. | ||
| Seafood Spoilage Predictor (SSP) software. | ||
| How to edit Temprecord data files for use in Seafood Spoilage predictor software (SSP). | ||
| Temprecord single-use loggers. | ||
| Temprecord multi-use loggers. | ||
Reference Documents | ||
| Accreditation Worldwide |
Test reports from laboratories accredited by International Accreditation New Zealand are accepted by 67 accreditation bodies in 52 economies. This document from International Accreditation New Zealand (IANZ) - a crown entity established under the Testing Laboratory Registration Act, 1972 - describes the role of accreditation. | |
| The Ice Point Explained |
The melting point of water is a very simple, effective and inexpensive temperature reference. This document explains how to carry out an ice point check. The document was prepared by D R White from MSL (Measurement Standards Laboratory of New Zealand). MSL is New Zealand's national metrology institute, operating within Industrial Research Limited under the authority of the New Zealand Measurement Standards Act 1992, June 2002. | |
| Conformity Assessment in New Zealand |
Most products or services are regulated in some way, normally to make sure that health, safety and environmental requirements are met.
Even if products are not regulated, the marketplace will still often require products to meet a particular standard. This document was prepared by International Accreditation New Zealand (IANZ) - a crown entity established under the Testing Laboratory Registration Act, 1972. | |
| General Information on Measurement Uncertainty |
Many important business decisions are based on the results obtained from quantitative testing. It is important that an indication
of the quality of laboratory test results reported is available to you.
Results of tests cannot be perfect and the term measurement uncertainty is used to describe this lack of perfection.
IANZ accredited laboratories are required to have a measure of the confidence placed on each result to demonstrate its fitness for your purpose.
Measurement uncertainty is a vital part of the test result that gives this information, and one that is used internationally This document was prepared by International Accreditation New Zealand (IANZ) - a crown entity established under the Testing Laboratory Registration Act, 1972. | |
| Joint IANZ/NATA Endorsement- requirements for use in calibration laboratories | This document was prepared by International Accreditation New Zealand (IANZ) - a crown entity established under the Testing Laboratory Registration Act, 1972. | |
| IANZ Accreditation - your assurance of technical competence |
This document outlines the role of independent testing laboratories in the provision of certification services. The document was prepared by International Accreditation New Zealand (IANZ) - a crown entity established under the Testing Laboratory Registration Act, 1972. | |
Certification Documents | ||
| Certificate of Accreditation for Temprecord International Limited | ||
| Scope of Accreditation Certificate for Temprecord International Limited | ||
 |
© 2010 Temprecord International Ltd |