Enable LED (LCD Logger only)

Contents  Previous  Next

Program Menu > Enable LED (LCD Logger only)

The Enable LED checkbox determines whether the green and red LED's on the logger are used to indicate whether a limit has been transgressed.  If this function is enabled, the logger will display a brief green flash if the logged data is within the limits programmed.  If the logger has recorded data outside the limits then the flash is red.

 

This parameter is only available in the G4 LCD logger.  The Mk3 and Mon-T loggers implement this functionality also (where the green and red LEDs indicate the status of the limits), but on those loggers it cannot be disabled.

 

 


(C) 1992-2019 Temprecord International Ltd
20/12/2017 9:11:58 AM
Temprecord Web Help