"Start at this date and time" is enabled.  Once the parameters have been saved you will no longer be able to access the logger parameters

Error and Warning Messages > "Start at this date and time" is enabled. Once the parameters have been saved you will no longer be able to access the logger parameters

This warning is issued when you try to save the parameters to a LCD logger and the "Start at this date and time" option is selected.

•The start time and date is achieved by setting a start delay as appropriate and then starting the logger.  For example if a start time and date is programmed for 3 weeks into the future, the start delay is programmed to be three weeks and the logger is started automatically when the parameters are applied to the logger.
 

•Once the parameters are saved to a logger with a start time and date programmed, the logger starts counting down the start delay, and it is not possible to access the logger parameters from that point on.
 

•Once the parameters are saved to a logger that has a start time and date programmed, the logger cannot be started with the button instead.

If you click on the Cancel button the parameters will not be saved.

See also:

Error and Warning Messages