•An unrecognised version of Temprecord is installed on this machine •Battery is exhausted •Battery is nearly exhausted •Confirm password is invalid •Data read from logger has not yet been saved. Save first ? •Datafile format error - probably not a Temprecord data file •Datafile format incorrect •Datafile format version error •Delete comment ? •Digest key and confirm are different •Do you want to create a new Parameter Set from the logger settings ? •Do you wish to exit Temprecord ? •Do you wish to reuse the Temprecord logger ? •Do you wish to start the Temprecord logger ? •Do you wish to stop the Temprecord logger ? •Encryption key and confirm are different •Error accessing logger information (xx) •Error carrying out command line functions •Error identifying logger (xx) •Error loading web file •Error opening web file •Error opening <filename> •Error reading file •Error reading logger data (xx) •Error reading logger information (xx) •Error restoring logger parameters (xx) •Error reusing logger (xx) •Error printing to PDF file •Error previewing PDF file •Error reading conversion results (xx) •Error reading logger mode (xx) •Error starting logger (xx) •Error stopping logger (xx) •Error viewing PDF File •Error writing file <filename> •Data is corrupted •Incorrect passphrase •Incorrect passphrase (Caps Lock is turned on) •Invalid limit delay count •Invalid lower temperature limit •Invalid password submitted •Invalid sample period •Invalid start date •Invalid start delay •Invalid start time •Invalid preset date or time •Invalid upper temperature limit •Logger nnn's parameters will be restored from the parameter set "xx". Do you want to continue? •Logger is currently in xx mode and cannot be read •Logger not in ready mode •Logger is unconfigured •Logger interface not found •Lower temperature limit is below minimum range of logger •No data loaded •No suitable parameter sets for logger nnn found •NOTE - This data logger remains within an accuracy of +/- 0.5C but for greater accuracy you may choose to have it re-calibrated •Parameter Set xx not found. Reuse logger anyway ? •Parameter restore operation completed •Password and confirm are different •Password is invalid •Password is not verified •Password Specification Errors •Start time and date has already passed •"Start at this date and time" is enabled. Once the parameters have been saved you will no longer be able to access the logger parameters •Temprecord cannot be stopped until start delay expires •Temprecord failed to reuse •Temprecord failed to start •Temprecord failed to stop •Temprecord has already been reused •Temprecord has not yet been started •Temprecord is already running •Temprecord is running from a network drive and an INI file from an earlier installation was also found •Temprecord is running from a network drive and no INI file was found on that server, or locally •Temprecord is running from a network drive and a local installation was also found •Temprecord is running from a network drive and an unrecognised local installation was also found •Temprecord is already started •Temprecord is already stopped •Temprecord Medical loggers should be programmed with a Named Parameter Set. Reuse logger without the Named Parameter Set ? •Temprecord must be reused before starting •Temprecord must be stopped before reuse •Temprecord was unable to create your TRW.INI file •Temprecord was unable to find your TRW.INI file •Temprecord was unable to write to your TRW.INI file •The Auto Mode option to reuse the logger is set but no options have been set to save data, Continue? •The comments/display limits for file <filename> have been edited but the changes have not yet been saved. Save file ? •The comment fields for logger <serial number> have been edited but the data has not yet been saved. Save logger data to file ? •The data from this logger has not yet been read. Do you wish to read the data and save it before re-using the logger ? •The data read from this logger shows indications that saturation has occurred •The logging mode parameter has been changed to log only temperature •The "Start at Time and Date" parameter has been disabled •The calibration period on this logger will expire in 12 weeks. •The settings you are saving to the logger have been changed and are no longer the same as the settings in the NPS file "xx" •This logger contains parameters from a Parameter Set "xx" but there is no local file of that name. Do you want to create one ? •This logger has been factory-configured for designated use by the owner "xx" •This logger has been factory-configured for designated use by the owner "xx" and the Named Parameter Set name is reserved •This logger's calibration is due in 2 weeks •The Temprecord help file for the selected language <filename> was not found. English language help will be used instead •This file may be damaged •This file does not pass integrity checking •This model Temprecord cannot be reused •This Temprecord can only be started by snapping off a tab •This Temprecord can only be stopped by snapping off a tab •This version of Temprecord is not installed on this computer, or possibly an older version is also installed •Unable access parameters. Temprecord is probably faulty •Unable to access parameters. Temprecord has been started •Unable to access parameters. Temprecord has finished logging •Unable to access parameters. Temprecord must be reused first •Unable to access Temprecord after reuse •Unable to access Temprecord after starting •Unable to access Temprecord after stopping •Unable to access Temprecord Logger •Unable to access Temprecord. Password is incorrect •Unable to carry out command-line functions •Unable to create spreadsheet •Unable to create folder •Unable to delete file <filename> •Unable to load file - insufficient memory •Unable to load named parameter set •Unable to load named parameter set (Auto Mode) •Unable to load named parameter set (reuse logger) •Unable to open COMx •Unable to open dialog •Unable to open form •Unable to open spreadsheet •Unable to print •Unable to read. Temprecord has not yet been started •Unable to read. Temprecord is probably faulty •Unable to read. Temprecord start delay has not expired •Unable to reuse logger (Logger is in Ready state) •Unable to reuse logger (Logger is in Start Delay state) •Unable to reuse Temprecord. Unit is probably faulty •Unable to save datafile to web •Unable to save file <filename> •Unable to save named parameter set •Unable to save file for emailing •Unable to save PDF file to web •Unable to save Temprecord parameters •Unable to start Temprecord. Unit is probably faulty •Unable to stop Temprecord. Unit is probably faulty •Unable to update parameters in logger •Unable to update parameters as Temprecord is not in ''ready'' state •Unable to update parameters as Temprecord is of a different type •Unable to update parameters as Temprecord is of older type •Unable to update parameters as Temprecord is of newer type •Unable to update parameters as Temprecord protected with password •Unexpected end-of-file •Unknown command option •Upper temperature limit is above maximum range of logger •WARNING - File damaged. Data may not be correct •Web file not found •You are running Temprecord from a network drive but it is also installed locally for the current user •You are running Temprecord from a network drive but it is also installed locally for all users •You are running Temprecord from a network drive but it is also installed locally for all users (shared settings) •You are running Temprecord from a network drive but it is also installed locally for use by remote users •You are running Temprecord from a network drive but there is also an unrecognised local installation
|