View Menu > Units
Changes the display units from degrees Celsius to degrees Fahrenheit, or vice-versa.
|
You can quickly swap between degrees C and F with the Ctrl-U key. You can also set the units from the Options/General tab.
|
|
Don't confuse the display units with the Mon-T Logger Units. The Mon-T Logger Units determine what units are used when programming the Mon-T - specific parameters (Minimum Temperature, and Resolution). The display units determine how temperatures are displayed in the Temprecord program
|
|
When a Mon-T logger is read, the display units are set to the Mon-T programmed logger units. I.e. if you program a logger in Fahrenheit units and read the logger with Temprecord set to display temperatures in Celsius, the display units will change to Fahrenheit after you read the logger's temperature data.
|
|