Error and Warning Messages > Battery is exhausted
The logger battery is exhausted. You should not use the logger and replace it with another.
This message will display if any attempt is made to program, start, or reuse the logger when the estimated battery capacity has reached zero.
The options Show battery status and Warn when battery exhausted must both be checked for this message to display.
|
The remaining logger battery capacity is not measured directly, but is calculated using Temprecord's knowledge of the past use of the logger. The figure arrived at is conservative, i.e. you may well get more use out of the logger than the displayed remaining battery capacity suggests. We do not recommend this, however, and a logger with a battery that shows as exhausted should be removed from service. |
(C) 1992-2019 Temprecord International Ltd