Error and Warning Messages > Do you wish to stop the Temprecord logger ?
You have asked to stop the Temprecord logger. This will stop the logger taking samples.
•If you wish to stop the Temprecord logger click the ‘Yes’ button.
•If you do not wish to stop the Temprecord logger, click the ‘No’ button. You will be returned to the Temprecord program and the logger will continue to record samples (unless loop overwrite is disabled and the logger has filled up).
|
If the loop overwrite option is turned on, once the logger is full, the oldest samples are overwritten. In this case you should always ensure that the logger is stopped after you have finished recording samples. If loop overwrite is turned off, the logger will stop recording samples when it is filled anyway, so it is not necessary to stop it until you wish to reuse it |
|
If you do not wish to have this question displayed each time you exit Temprecord, open the Options/General form and clear the ‘Prompt before stopping Temprecord’ check-box.
|
See also:
(C) 1992-2019 Temprecord International Ltd