Program Parameters Dialog |
Contents Previous Next |
Program Menu > Program Parameters Dialog This dialog allows you to set up the Temprecord logger before it is started.
•When you have finished changing the parameters, click the ‘OK’ button to save the parameters to the logger and exit this dialog. •If you have more than one logger to set up with the same or similar parameters, click the ‘Apply’ button to save the parameters to the logger and leave this dialog open. •Click the ‘Cancel’ button to exit this dialog without changing the logger parameters. •Click the ‘Defaults’ button to set all the parameters (except for the ‘Password’ and ‘Confirm’ fields) from the default options. •You can load the parameters from a Named Parameter Set, and optionally set the color associated with the parameter set.
You can change the following parameters:
Logging Temperature, Humidity, or Both safe range delay (LCD logger only) safe range limit (LCD logger only)
See also |
(C) 1992-2019 Temprecord International Ltd 25/02/2016 3:30:02 PM |
Temprecord Web Help |