Program Menu > Auto Mode Operation
Auto mode operation allows you to carry out a sequence of operations on a batch of loggers. For example, you can stop, read, save, reuse, program the parameters, and start a logger in sequence by doing nothing more than placing the logger in a reader. Temprecord detects when the logger has been inserted, programs it, then waits for it to be removed before waiting for the next logger.
You can determine what operations are carried out by changing the Auto Mode Options
To start Auto Mode, select Auto Mode from the Program menu. Once the Auto Mode window is displayed, you can click on the Start button and Temprecord will wait for a logger. When one is inserted into the reader it will be detected and the sequence of operations defined by the Auto Mode Options will be carried out. When the operations are complete Temprecord waits for the logger to be removed.
To end logging mode click the Stop button. Click the Exit button to close the Auto Mode window.
|
Never remove the logger from the reader while Auto Mode operations are underway. Wait until operations have finished and REMOVE LOGGER is displayed. If you need to remove a logger while processing is underway, click on the Stop button first and wait until Auto Mode has stopped. |
|
You cannot use Auto mode to load a parameter set into the logger if that logger is locked. |
|
You can also start Auto Mode operation by clicking on this speed button
|
on the toolbar displayed along the top of the Temprecord main window.
See also:
(C) 1992-2019 Temprecord International Ltd