Reusing a Logger

Contents  Previous  Next

Program Menu > Reusing a Logger

The Program/Reuse Logger function allows Multi-trip or Scientific Temprecord loggers to be reused.  The Temprecord logger must be in the 'stopped' state.  If the Temprecord unit has been password-protected, you will be asked to enter the password before the unit can be restarted.  If you wish to change the password, use the Program/Parameters function after you have reused the logger .  If you have recently read a Temprecord logger and not yet saved the contents to a disk file, you will be prompted to save the data first.

 

When a Temprecord is reused, the current sample period is retained.  If you want to set a different sample period, use the Program/Parameters function after you have reused the Temprecord logger.  

 

When you use the Program/Reuse Logger function, you will be asked to confirm that you want to do this.  If you prefer not to be asked this question, you can uncheck the option 'Prompt before reusing' in the General Options form.

 

When a logger is reused the start delay is set back to the value it was programmed with for the last trip - i.e. the value is preserved. This behaviour is different to the behaviour with versions prior to 5.28.0.2360.  In versions prior to this the start delay was set to the value programmed in the defaults options when a logger is reused.  Regardless, you can still alter the start delay to a different value before starting the logger however

 

 

You can reuse the logger currently in the reader interface by clicking on this speed button on the toolbar displayed along the top of the Temprecord main window

 

See also:

Starting a logger

Stopping a logger

Sample period

Start delay

Start time and date

Limit Delay

Lower and Upper limits

Loop Overwrite

Start and stop with button

Allow markers

Auto Mode Operation

 

Saving a file

 


(C) 1992-2019 Temprecord International Ltd
24/05/2014 4:29:20 PM
Temprecord Web Help