Program Menu > Stopping a Logger
Use the Program/Stop Logger function to stop the Temprecord logging temperature samples. The Temprecord logger status must be LOGGING in order for it to be stopped.
The Temprecord logger will flash the red LED four times in quick succession when logging is stopped.
If you have recently read a Temprecord logger and not yet saved the contents to a disk file, you will be prompted to save the data first.

|
When you use the Program/Stop Logger function, you will be asked to confirm that you want to do this. If you prefer not to be asked this question, you can uncheck the option 'Prompt before stopping' in the General Options form.
|

|
You can also stop loggers by pressing the button on the logger.
|

|
If a logger has a password or pass-phrase programmed, and Stop with button is not enabled, the pass-phrase will be required.
|

|
Inland and Export loggers can only be stopped by snapping off the tabs.
|

|
You can stop the logger currently in the reader interface by clicking on this speed button on the toolbar displayed along the top of the Temprecord main window
|
See also:
Starting a logger
Reusing a logger
Sample period
Start delay
Start time and date
Limit Delay
Lower and Upper limits
Loop Overwrite
Start and stop with button
Allow markers
Auto Mode Operation
Saving a file
|