Contents | Index

• Introduction
  • What's new in version 6.3?
  • License Information
  • Help Menu
  • How do I find out what version of Temprecord I have?
  • Getting Started with Temprecord
  • How To Use Help
  • Pop-Up Menus
  • Toolbars and Speed Buttons
  • Toolbar Options
  • Command-Line Parameters
  • Where do I plug my reader in ?
  • What is a "passphrase?"
  • Temprecord Humidity Loggers
  • Temprecord Dual Temperature Loggers
  • How Do I...
  • View Help As PDF
  • View Help on the Web
  • About Temprecord Help
• Installation of Temprecord
  • Installing Temprecord on Networks
  • Installing Temprecord Reader USB Drivers
  • Notes for System Administrators
    • Batch Installation
    • Setup command line parameters
    • Installing the USB Drivers Manually
    • Specific issues when installing Temprecord on a network server
    • Modifying the Registry to Enable CHM Help across Network Drives
• Common Problems
  • Temprecord will not start
  • Temprecord won't recognize my logger
  • The arrow keys don't move the cursor on the graph
  • The trace isn't visible on the graph
  • I can't alter some of the parameters
  • I get an error when I try to update the parameters
  • I can't print with Temprecord
  • I get a 'SPOOL32 Error' when I print
  • I can't view a PDF report with Adobe Reader.
  • When I open a menu, some of the items are grayed
  • When I click on a button, nothing happens apart from a beep
  • My logger says it exceeded the limits, but I can't see where
  • The start time displayed changes every time I insert a marker
  • I have set different colors for display of values above the upper limit and below the lower limit but my values still display and print in one color only
  • The statistics report shows a section "Statistics from Logger" - What are these and how are they different?
  • I can't get the TTV statistics to display or print, or export them to a file
  • I can't get the PHI statistics to display or print, or export them to a file
  • Why don't the logger statistics agree with the statistics in the report?
  • I cant print my data as a list of values
  • COM Port Issues
  • I cant select the Humidity options when I program the logger parameters
  • The temperature exceeded the limits but the summary does not show this
  • My filenames are all garbled
  • Why doesn't my printed graph look the same as the one I see on screen?
  • Why does Temprecord keep asking me if I want to Save my file?
  • The format of the displayed date format doesn't match my Control Panel regional settings
  • My Main Menu toolbar has disappeared
  • Common questions about file digests
  • Temprecord reports that my logger is "locked" and I can't save the parameters.
• Temprecord Loggers
  • Operation of the G4 LCD logger
• File Menu
  • Checking for a Logger
  • Reading a Logger
  • Accessing Temprecord ...
  • Saving a File
  • Save File Dialog
  • Questions about Save File and Save File As...
  • Saving Web Files
  • Opening a File
  • Opening Web Files
  • Open File Dialog
  • Deleting a File
  • Delete File Dialog
  • Renaming a File
  • Emailing Files
  • Closing a File
  • Closing all files
  • Exporting Data
  • Exporting daily average temperatures
  • Print Dialog
  • Printing Data
  • Saving to a PDF File
  • Opening recent files
  • Exiting Temprecord
• Comments
  • Editing Comments
  • Edit Comment Dialog
  • Comments List
  • Repositioning a comment
  • How Temprecord positions your comments on the graph
  • Adding a Comment
  • Deleting a comment
  • Locking/unlocking a comment
  • Duplicating a comment
  • Finding a comment
  • Saving Comments
• Program Menu
  • Programming a Logger's Parameters
  • Program Parameters Dialog
  • Logging Mode
  • Setting Up Humidity Loggers
  • Setting Up Dual Temperature Loggers
  • User Data
  • Meta-strings in user data
  • Sample Period
  • Logging Duration
  • Start Delay
  • Start Time and Date
  • Password
  • Password Required
  • Lower and Upper Limits
  • Limit Delay
  • Enable Safe Range
  • Enable LED (LCD Logger only)
  • Safe range delay (LCD logger only)
  • Safe range limit (LCD logger only)
  • Loop Overwrite
  • Start and Stop with Button
  • Allow Markers
  • Mon-T Temperature Logging Range Parameters
  • Setting up several loggers
  • Setting up a default set of parameters
  • Starting a Logger
  • Stopping a Logger
  • Reusing a Logger
  • What the LEDs on the logger tell you
  • Using the button on the logger to mark an event
  • Using the button on the logger to start and stop logging
  • Changing Logger Parameters
  • Accuracy and Resolution
  • Differences between the displayed temperature and the logged temperature
  • Sample Rate Issues
  • Auto Mode Operation
  • Kiosk Mode Operation
  • Designated Use Loggers
  • Factory Restore Operation
  • Named Parameter Sets
    • Loading a parameter set
    • Creating a new parameter set
    • Editing a parameter set
    • Renaming a parameter set
    • Deleting a parameter set
    • Parameter sets and the default options
    • Parameter sets and Auto Mode operation
    • Parameter Sets and reading parameters from a logger
    • Meta-strings in parameter sets
    • Named Parameter Sets technical information
• View Menu
  • Toolbars
  • Status Icons
  • Summary View
    • Owner name
  • Statistics View
    • Total Temperature Value (TTV)
    • Mean Kinetic Temperature (MKT)
    • Product Integrity Profile (PIP)
    • Process Hygiene Index
    • Refrigeration Index
    • Rate of Cooling
  • Values View
  • Units
  • Graph View
    • The Sample Cursor
    • Setting the date and time format on graph view
    • Changing the view mode
    • How the limits are used when Temprecord displays data
    • Viewing Temperature, Humidity, or Both
    • Displaying the same file in 2 or more windows
    • Displaying data read from a logger in 2 or more windows
    • Go to Functions
      • Find Trace
      • Go to Sample
      • Go to First, Go to Last Sample
      • Go to Start, Go to End
      • Go to Next, Go to Previous Marker
      • Go to Min, Go to Max Sample
    • Select all samples
    • Copy to Clipboard
    • Copy to Excel
    • Set as Start, End Markers
      • Using the Start and End Markers
      • Set as Start Sample
      • Set as End Sample
      • Using the Min and Max Markers
      • Using the User Markers
      • Set all windows start and end samples from this one
    • Zoom Functions
      • How zooming works
      • The Sample Cursor and Mouse Cursor
      • Zooming with the mouse
      • Zooming with the mousewheel
      • Horizontal Zoom
      • Vertical Zoom
      • Zoom Between Start and End markers
      • Zoom All
      • Zooming with the Mouse
      • Zoom Window to Presets
      • Zoom all Windows to Presets
      • Zoom All Windows To This One
      • Assign Presets from Window
      • Using the Zoom Presets
    • Moving about the graph
    • Tile Vertically
    • Tile Horizontally
    • Cascade
    • Close
    • View Info
    • Refrigeration Index Graph View
• Options Menu
  • How the Options work
  • Font Dialog
  • General Options
  • COM Port Options
  • File Saving Options
    • Default TRX Filename
    • Folder for .TRX Files
    • Default PDF Filename
    • Folder for .PDF Files
    • Also use these settings when I save the file manually
    • When are default filename and folders used?
    • File Saving Options - Web Files
    • File Saving Options - Saved File Format
    • File Saving Options - Digests
    • File Saving Options - Encryption
    • File Saving Options - Date Formatting
  • Summary View Options
  • Show Mon-T - specific settings
  • Values View Options
  • Statistics View Options
  • Graph View Options
    • Zoom and presets options
  • Export Options
    • Copy to Clipboard, Excel Options
  • Printing Options
  • Set Print Colors
  • Header and Footers, Paper Size
  • What about the Default Parameters?
  • Managing Named Parameter Sets
  • Where have the defaults gone?
  • Mon-T Parameter Defaults
  • Parameter Defaults
  • Email Options
    • SMTP Email Options
    • Emailing Files from Temprecord using GMail
  • Language Options
  • Temprecord Foreign-language Translation
  • Web Options
    • Tracking Options
    • Proxy Settings Options
    • Web Load and Save Options
  • Auto Mode Options
  • Date Formatting Options
  • System Options
  • Diagnostics Reports
• Using the File and Folder Templates
• View Options
• Meta-strings
• Error and Warning Messages
  • An unrecognised version of Temprecord is installed on this machine
  • Bad address
  • Bad CRC
  • Bad verify
  • Battery is exhausted
  • Battery is nearly exhausted
  • Confirm password is invalid
  • Data is corrupted
  • Data read from logger has not yet been saved.  Save first ?
  • Datafile format error - probably not a Temprecord data file
  • Datafile format incorrect
  • Datafile format version error
  • Delete comment  ?
  • Digest key and confirm are different
  • Do you want to create a new Parameter Set from the logger settings ?
  • Do you wish to exit Temprecord ?
  • Do you wish to re-use the Temprecord logger ?
  • Do you wish to start the Temprecord logger ?
  • Do you wish to stop the Temprecord logger ?
  • Encryption key and confirm are different
  • Error carrying out command line functions
  • Error accessing logger information (xx)
  • Error identifying logger (xx)
  • Error opening <filename>
  • Error loading web file
  • Error opening web file
  • Error printing to PDF file
  • Error previewing PDF file
  • Error viewing PDF File
  • Error reading file
  • Error reading logger data (xx)
  • Error reading logger information (xx)
  • Error restoring logger parameters (xx)
  • Error reusing logger (xx)
  • Error reading conversion results (xx)
  • Error reading logger mode (xx)
  • Error starting logger (xx)
  • Error stopping logger (xx)
  • Error sending email
  • Error writing file <filename>
  • Incorrect firmware
  • Incorrect passphrase
  • Incorrect passphrase (Caps Lock is turned on)
  • Invalid limit delay count
  • Invalid lower temperature limit
  • Invalid password submitted
  • Invalid sample period
  • Invalid start date
  • Invalid start delay
  • Invalid start time
  • Invalid preset date or time
  • Invalid upper temperature limit
  • Logger nnn's parameters will be restored from the parameter set  "xx".  Do you want to continue?
  • Logger Firmware Revision 2.14
  • Logger interface not found
  • Logger is unconfigured
  • Logger not in ready mode
  • Logger is currently in xx mode and cannot be read
  • Lower temperature limit is below minimum range of logger
  • No data loaded
  • No suitable parameter sets for logger nnn found
  • No wakeup from logger
  • No response from logger
  • Parameter restore operation completed
  • Parameter Set xx not found. Reuse logger anyway ?
  • Password and confirm are different
  • Password is invalid
  • Password is not verified
  • Password Specification Errors
  • Start time and date has already passed
  • "Start at this date and time" is enabled.  Once the parameters have been saved you will no longer be able to access the logger parameters
  • Temprecord cannot be stopped until start delay expires
  • Temprecord failed to re-use
  • Temprecord failed to start
  • Temprecord failed to stop
  • Temprecord has already been re-used
  • Temprecord has not yet been started
  • Temprecord is already running
  • Temprecord is already started
  • Temprecord is already stopped
  • Temprecord is running from a network drive and no INI file was found on that server, or locally
  • Temprecord is running from a network drive and an INI file from an earlier installation was also found
  • Temprecord is running from a network drive and a local installation was also found
  • Temprecord is running from a network drive and an unrecognised local installation was also found
  • Temprecord Medical loggers should be programmed with a Named Parameter Set.  Reuse logger without the Named Parameter Set ?
  • Temprecord must be re-used before starting
  • Temprecord must be stopped before re-use
  • Temprecord was unable to create your TRW.INI file
  • Temprecord was unable to find your TRW.INI file
  • Temprecord was unable to write to your TRW.INI file
  • The Auto Mode option to reuse the logger is set 
  • The comment fields for file <filename> have been edited but the changes have not yet been saved.  Save file ?
  • The comment fields for logger  <serial number> have been edited but the data has not yet been saved.  Save logger data to file ?
  • The data from this logger has not yet been read.  Do you wish to read the data and save it before re-using the logger ?
  • The data read from this logger shows indications that saturation has occurred
  • The factory calibration applied to this logger at manufacture can no longer be guaranteed
  • The logging mode parameter has been changed to log only temperature
  • The "Start at Time and Date" parameter has been disabled
  • The recalibration period on this logger will expire in N weeks
  • The settings you are saving to the logger have been changed and are no longer the same as the settings in the NPS file "xx"
  • The Temprecord help file for the selected language <filename> was not found.  English language help will be used instead
  • This file does not pass integrity checking
  • This file may be damaged
  • This logger contains parameters from a Parameter Set "xx" but there is no local file of that name.  Do you want to create one ?
  • This logger has been factory-configured for designated use by the owner "xx"
  • This logger has been factory-configured for designated use by the owner "xx" and the Named Parameter Set name is reserved
  • This logger''s recalibration is due in N weeks
  • This model Temprecord cannot be re-used
  • This Temprecord can only be started by snapping off a tab
  • This Temprecord can only be stopped by snapping off a tab
  • This version of Temprecord is not installed on this computer, or possibly an older version is also installed
  • TX timeout
  • Unable access parameters.  Temprecord is probably faulty
  • Unable to access parameters.  Temprecord has been started
  • Unable to access parameters.  Temprecord has finished logging
  • Unable to access parameters.  Temprecord must be re-used first
  • Unable to access Temprecord after re-use
  • Unable to access Temprecord after starting
  • Unable to access Temprecord after stopping
  • Unable to access Temprecord logger
  • Unable to delete file <filename>
  • Unable to access Temprecord.  Password is incorrect
  • Unable to load file - insufficient memory
  • Unable to load named parameter set
  • Unable to load named parameter set (Auto Mode)
  • Unable to load named parameter set (reuse logger)
  • Unable to open COMx
  • Unable to open form
  • Unable to open PDF help file
  • Unable to open browser
  • Unable to print
  • Unable to read.  Temprecord has not yet been started
  • Unable to read.  Temprecord is probably faulty
  • Unable to read.  Temprecord start delay has not expired
  • Unable to reuse Temprecord.  Unit is probably faulty
  • Unable to reuse logger (Logger is in Ready state)
  • Unable to reuse logger (Logger is in Start Delay state)
  • Unable to save datafile to web
  • Unable to save file <filename>
  • Unable to save PDF file to web
  • Unable to save named parameter set
  • Unable to save Temprecord parameters
  • Unable to start Temprecord.  Unit is probably faulty
  • Unable to stop Temprecord.  Unit is probably faulty
  • Unable to update parameters in logger
  • Unable to update parameters as Temprecord is not in ''ready'' state
  • Unable to update parameters as Temprecord is of a different type
  • Unable to update parameters as Temprecord is of older type
  • Unable to update parameters as Temprecord is of newer type
  • Unable to update parameters as Temprecord protected with password
  • Unable to carry out command-line functions
  • Unable to create spreadsheet
  • Unable to create folder
  • Unable to open spreadsheet
  • Unable to open dialog
  • Unable to save file for emailing
  • Unexpected end-of-file
  • Unexpected errors
  • Unknown command option
  • Unknown logger response
  • Upper temperature limit is above maximum range of logger
  • WARNING - File damaged. Data may not be correct
  • Web file not found
  • You are running Temprecord from a network drive but it is also installed locally for the current user
  • You are running Temprecord from a network drive but it is also installed locally for all users
  • You are running Temprecord from a network drive but it is also installed locally for all users (shared settings)
  • You are running Temprecord from a network drive but it is also installed locally for use by remote users
  • You are running Temprecord from a network drive but there is also an unrecognised local installation